|
View previous topic :: View next topic
|
| Author |
Message |
alex_urg
Joined: 03 Oct 2007
Posts: 1
|
 Posted: Wed Oct 03, 2007 11:38 am Post subject: Solid works and AutoCad problem |
    |
|
Hello All,
staff I have the following problem: we own a textile company and as usual use AUtoCad for making drawings. A few months ago we tried (actually our engineers) to install Solid Works. After installation we found that some files (means drawings files) of Autocad did change the extencion .* and is not possible to open it both by AutoCAD or Solid Works. Did any one had something like that? Sorry but I am not so professionla in drawings of 3D and our engineers speak no English. If any one can help me?
regs Alex |
|
| Back to top |
|
 |
dexigner_3dmodel
Joined: 12 Oct 2007
Posts: 1
|
| Posted: Fri Oct 12, 2007 9:15 pm Post subject: you can send me some of your drawings and I'll try to fixed |
|
|
Im not sure about solidworks, and since most solidworks not compatible w/autocad (remember autocad is from autodesk)
you can send me some of your drawings and I'll try to fixed that for you including assembly drawings
my email :- blocked -
thnx
gq |
|
| Back to top |
|
|
dpost
Joined: 29 Oct 2007
Posts: 2
|
| Posted: Mon Oct 29, 2007 10:57 am Post subject: |
|
|
Solidworks should open almost 50 other programs' file types. What file type(s) are trying to open?
if you are trying to open Autodesk files with Solidworks program, you shouldnt have any challenges. if the other way around, you may be in trouble.
There may be some settings in the options of SW that may allow you to open these files as well. |
|
| Back to top |
|
|
|
blogger
del.icio.us
digg
slashdot
