ArchitectureWeek DesignCommunity Forum Index » PowerCADD Discussion

View previous topic :: View next topic
Author	Message
sadiarmg Joined: 30 Jul 2007 Posts: 6	Posted: Thu Mar 06, 2008 8:04 am    Post subject: DWG issues I'm wondering if any of you are having the same problems. I've been having trouble saving my Powercadd files into DWG. PowerCADD quits midway through the saving procedure. It just doesn't make sense that I have been able to convert some PowerCADD files, but that is if the PowerCADD files does not have a lot of drawing content/layers/sheets. I have Powercadd 7. Please let me know if this can be resolved. Thanks
Back to top	share:   blogger     del.icio.us     digg     slashdot
pbacot Joined: 15 Apr 2004 Posts: 837 Location: Northern California	Posted: Thu Mar 06, 2008 9:23 am    Post subject: Are you finding anything in common with the files you are having trouble with? You say it doesn't make sense, but you then seem to indicate that more complex files don't work as well. I don't know if this could be a memory issue. Try this. Make a totally new file of the same data. I found that there was something wrong with one layer of my stationery, no matter what was on that layer. So every file that included that layer would not translate properly. I had to move the objects into a fresh file (not a stationery file). _________________ Peter B
Back to top	share:   blogger     del.icio.us     digg     slashdot
jasonlocher Joined: 14 Apr 2004 Posts: 610 Location: Austin, Texas	Posted: Thu Mar 06, 2008 9:59 am    Post subject: run cleanup drawing then, as peter says, make a new file, select your objects, then paste special w/ thru layers on.
Back to top	share:   blogger     del.icio.us     digg     slashdot
sadiarmg Joined: 30 Jul 2007 Posts: 6	Posted: Thu Mar 06, 2008 11:47 am    Post subject: I just did what Jason and Peter suggested and it did not work I think its not a layer issue. It has to be something in my drawing that is corrupted. It might be a hatch/fill issue. Any more suggestions
Back to top	share:   blogger     del.icio.us     digg     slashdot
sadiarmg Joined: 30 Jul 2007 Posts: 6	Posted: Thu Mar 06, 2008 12:18 pm    Post subject: I just solved it. My Powercadd files that were big just took too much memory. I just went to another computer with more RAM, and it just saved the DWG files faster.
Back to top	share:   blogger     del.icio.us     digg     slashdot
Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First

ArchitectureWeek DesignCommunity Forum Index » PowerCADD Discussion

Page 1 of 1