The Structures of the Future

Goto page Previous  1, 2, 3, 4
 
Post new topic Reply to topic
   ArchitectureWeek DesignCommunity Forum Index » New Structure Forum
View previous topic :: View next topic  
Author Message
usarender
millennium club


Joined: 01 May 2004
Posts: 1258
Location: San Diego, Ca

PostPosted: Sat Sep 22, 2007 1:23 pm    Post subject: Further Developments on the Arched Access Gates Reply with quoteFind all posts by usarender

As there has been some confusion there is a need to explain how the ring and the arch systems function independently.

The ring system floats independently of the vertical access arches, and does not depend on them to maintain itself in space. They are two separate elements in the system.

FURTHER DEVELOPMENTS ON THE ARCHED ACCESS GATES


Please see the image attached below.
(The image only appears when logged in, for some reason. If the image is not appearing on your screen, please visit our site to see the images of the system).

GATEWAY TO THE SKY

The arched portals make use of the atmospheric pressure differentials to suspend weights in space. They maintain inner chambers that have three galleries plus a full length lateral chamber as follows -->>

1. The lower gallery at the ground at atmospheric pressure. This lower gallery is allowed to expand in length all the way up to the top of the arches.
2. The middle gallery a decompression chamber. This will be the human elevator car.
3. The upper gallery a vacuum chamber. This vacuum is maintained in the upper portion all the way up.
4. Lateral chambers. These run from the ground all the way up and operate at ground pressure. They are used as regulatory valves and to re-fill the upper chambers with pressure.

Take for example, a barometer filled with mercury as an example, or take for example an inverted model of water pressure. The high pressure at the top where the water is pushes the water down at the bottom up to the same height. So using this same principle, the greater atmospheric pressure differentials between the ground points at the stratospheric points can be used to hoist weights vertically, if we maintain this ground pressure stable in the lower chambers all the way up.

The atmospheric pressure differentials between the ground pressure and upper stratosphere pressure will be placed in the lower and the upper chambers to pull the weight up vertically with no need for a heavy lift. Further, the pressure differential will maintain the lower part in compression and maintain the shape of the arch, as the elevator moves up, being lifted and carried by the pressure differentials, thus not exerting substantial weight on the arch. Any spill-over of weight is picked up by the baloons. The portions of the arch above the elevator do not have any weight in them until an elevator reaches their path. So the arches themselves need not support a large amount of weight. They carry only the people also. The elevating chambers in the arches are sucked up vertically by the vacuum and pressure differentials. So the balloons merely hold the arches in place and carry small amounts of weight. At the points lower to the ground, where more vertical thrust is needed, the pressure differential is the greatest. At this point the arch is vertical in position, so people move up vertically within the pressure differential chambers. As the people and objects move up the arches, the pressure differentials decrease, but so does the force of gravity, as they begin to exit the atmosphere. As the people reach the nearly horizontal portions of the arch, the atmospheric pressure up there will be low and also the gravity will be low. But the lower atmospheric pressure is maintained in the lower chamber, which now expands all the way up to the top behind the elevator cars, also expanding the lower arch into its full shape.

Since the sequence of three internal chambers will be able to carry only one elevator from ground all the way up, each arch maintains various parallel chambers to allow more then one vertical elevator access path in each arch. The elevators and the arches will be made with low weight expandable synthetic materials that are able to withstand great pressures. This allows the entire arches and interior elevating chambers to be very light in weight.

As people ascend, they will be given oxygen masks and also parachutes, as security measures. Once the people reach the space ring, they can remove the equipment and parachutes. The interior elevators will also be connected to cables which go from the ground all the way up, to hold the elevator cabins in place should the entire arch collapse for some reason. These cables will also help hoist the elevators up within the arches, in situations where the pressure differentials are reduced, and to complement the pressure differential lifting force with a mechanical force as well. These cables will be attached to the balloons and to the upper global ring as well.

The central shaft connected to the rings will elevate the heavier cargo. The central shaft will use a combination of a vertical lift attached to the cable and the global ring at the top, and also the same atmospheric pressure differential chambers, which will suck the loads up vertically as well as being hoisted at the same time. This reduces the load on the global rings and the vertical hoisting cable substantially. The load will be shared by the space hoist connected to the global rings, and the pressure differential chambers.

Further, the arched access portals are connected at the top to the rings also, so are suspended at that point, and also along their path, by the balloons. The balloons are only needed to maintain the arched curvature to the shapes when the arches are empty and to hold them further in place. Further, the intersecting arches meet at the central shaft and this also provides further support, preventing the upper portion of the arch structure from swaying in the heaviest higher altitude winds. The middle and lower portions will not sway, as they will be filled with pressurized air while the elevator is ascending. The arches are allowed to bend and sway some in the heavy winds above. This will not interfere with their operation. Further, when the wind forces are too strong, the arches can be compressed in length by " reeling them in" from the central shaft and then become more like straight lines, and the ascent becomes an inclined 60 degree angle, approximately. The arches will be made with cables attached to springs as well, and they can elongate or expand into the full arch shapes as needed, and this provides them with malleability to resist the wind forces.

As shown, the expansion pressure caused by the atmospheric differential also expands the arches and maintains them suspended. Especially since the weights are being pushed up by the pressure differentials and not by being fully held by the arches. So on deployment, the entire arches can be elevated by the multiple balloons, and extended up into the skies, and as they are extended, they fill will pressured air, which is sucked up into the arches and extends then to their full height. Once they are hooked to the central shaft, the lower chamber is isolated and the pressure released from the remaining portions of the arch above, awaiting passengers. Passengers enter the compression chambers and these are released and pushed up vertically into the vacuum above within the arches. After the elevator car is evacuated, the sequence is repeated and the arch begins to operate taking groups of people up into the global ring. When the air is removed from the upper arch portions, the arches will be sucked into a tight closed position. As the compression chambers are pushed up, the arch left behind is filled with compressed air and the closed arches in the front of the elevator cars is pushed open to give path to the ascending elevators.

Groups of people will be accessing the arches with large distances in between each person going up, so the balloons need only to hold a few people each at a time within the arches. When there are no people in the arches, the baloons will be merely holding the arches in place. The arches can be filled with air at times when they are not in use, and this pressurized air will maintain the arches hanging in the sky, with their tops connected to the global ring. The balloons at these times can be allowed to drift out of gas and hang suspended along the sides of the arch until the arches are placed in use again. The balloons are then re-charged with helium, and the air from the arches is removed, forming a vacuum within, sucking the air up into space, and their interiors collapsing, with the entire arches supported by the balloons. The lower portion remains filled with ground level pressure air, and the elevators then can be pushed up into the vacuum until they reach the top. Then the procedure is repeated as normal. Air is allowed to enter the sides of the arch at all points, creating a pressure equalization, and the elevators catapult back down to the ground. The air is then removed from the upper chambers of the arch and the proceedure is repeated, to carry people up to the sky, being pushed by the pressure differentials all the way up.

I have chosen the form of the arches so as to provide a more comfortable ride up, rather then a vertical one or a straight 60-70 degree trip all the way. Better to have an initial vertical ascent, when the pressure differential is greatest, and thus the vertical thrust is greatest. This is followed by a gradual curvature to a horizontal ascent as the people reach the top of the arched access gates.

Below attached is a diagram of the multiple rings system, and the chambers of ring globes that will encase the rings.

The upper ring globes move with the cables, and with the orbiting bodies attached at the end of the cables. They slide along the central ring, being connected by magnetic connectors, with a trigger safety system. The lower ring globes are fixed. The hoist cables go through these, and pull the weights up to the global ring. All the system below the ring is fixed and all the system above is in movement. A section is shown also, which illustrates how the entire system will be encased on all sides by the ring globes, creating an encased central ring, out of the reach of bodies which may damage it. If one of the ring globes is hit, it can be repaired, and the main ring is left undamaged. The ring globes will be made with inflatable globes that are filled with oxygen and maintain small compartments and a structure to withstand impacts or explode on impact, leaving the central ring intact.


Note: For some reason, the images do not appear unless one is logged in. If they do not appear on your computer, please visit our site Project Liquid Universe and view the page "Gateway to the Sky".


Last edited by usarender on Wed Oct 03, 2007 6:22 pm; edited 1 time in total
Back to top
View user's profileSend private messageSend e-mailVisit poster's website    share:   blogger     del.icio.us     digg     slashdot    
P.C.
millennium club


Joined: 26 May 2004
Posts: 2163
Location: Denmark

PostPosted: Wed Sep 26, 2007 1:12 pm    Post subject: Reply with quoteFind all posts by P.C.

Allow me to add a link about nanno mashines ; an interesting video,

http://gadgettinyinspector.blogspot.com/2007/09/nanotech-assembler.html
Back to top
View user's profileSend private messageSend e-mailVisit poster's websiteAIM Address    share:   blogger     del.icio.us     digg     slashdot    
futuristarchitect



Joined: 16 Nov 2008
Posts: 1

PostPosted: Sun Nov 16, 2008 2:13 pm    Post subject: Reply with quoteFind all posts by futuristarchitect

This is a very interesting topic, and most relevant to the future.

With all the economic problems the world is seeing, pursuing grand new mega projects and the structural systems of the future will be a boost to the global economy and fuel a new era of prosperity.

This link is interesting also, and related to this topic-->>

http://www.designcommunity.com/forums/topic-19088.html

It seems we need more global innovators with vision, who are also architects and engineers, and who are willing to present their vision to the world without fear of recrimination or antagonism on the part of those who envy the visionaries.

Those who look into this will find these ideas most interesting and inspiring. The possibility of a gateway to space is the dream of many visionaries. This concrete method presented is achievable.

Given all the mega projects in Dubai currently, the world will soon be ready to start thinking even bigger.

With such fascinating propositions, one can only welcome the invitation to join the vision.
Back to top
View user's profileSend private messageSend e-mail    share:   blogger     del.icio.us     digg     slashdot    
nanrehvasconez



Joined: 25 Feb 2008
Posts: 212

PostPosted: Sun Nov 16, 2008 9:39 pm    Post subject: Reply with quoteFind all posts by nanrehvasconez

Nirvana!, would your ideas benefit the public at large, can you inject a bit of social balance, better shelter for the masses? If not you will have to work in Dubai and Saudi Aravia, were non of the above counts.
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
rocketman



Joined: 19 Nov 2008
Posts: 4

PostPosted: Wed Nov 19, 2008 4:41 pm    Post subject: Reply with quoteFind all posts by rocketman

These projects will benefit the w.o.r.ld., the .poor, the homeless, as they will house a t.ho.u.s.a.nd.. d.r.e.a.m.s.... and allow the p.o.or... to get a piece of one of the biggest pies the world has seen - and get also ...r.i.ch... in the process, if they so desire, as they get in on the ground floor. Do you think Dubai will really embrace this vision? All their development ? Really, what do they care about? Is it not oil, and building an empire for their future, for tourism ? What will happen when all the oil dries up? All those cities will turn unto ghost cities, with no capital left to reform them. They will serve as beacons of a lost age, the age of oil, and the damage it is causing on the environment. Empires being built based on the greed for more oil....and the planet delving into the darkness of the shadow of pollution and environmental degradation.... when will all this madness for more oil end?

It is high time the world seek for more clean solutions, and also heed the call for a g.l.o.bal effort to join forces and bulk those who would exploit us - and give back to the p.o.or, the base workers the control of the system, now so entrenched in the hands of the r.i.ch.. and w.e.a.l.t.hy, who care not to produce, but rather to use other's hard earned money to build their own shady empires, glossed and beautiful on the outside, but retched and rotten at it's base, build on the filth of the exploitation and control of black gold.... many an e.m.p.ir.es.. have fallen due to ..g.re.ed.. and this will be no exception...

Only one empire will stand - the empire of j.u.s.t.ice, of l.i.b.e.r.t.y, of ....e.q.u.a.l.i.ty, of f.r.e.e.d.om, of unity, of ...h.u.m.an.it.y ....f.i.g.h.ti.n.g for one vision, the vision of all for one and one for all, only achievable by uniting our .m.i.n.ds and s.p.i.r.its into a common ....m.a.t.r.i.x.... of ....p.u.r.e. ...rational....e.n.e.r.gy, b.o.u.nd and secured by the h.e.a.v.enly ...forces of .a.n..g.e.ls and h.e.a.v.e.n.ly ....p.o.wers, when they u.s.h.er.. in the new era of the k.i.n.g.d.o.m..., of the s.k.i.es.., of the .h.e.a.v.en.s., of j.u.s.t.i.ce, m.e.r.c.y and pro.s.perity of ..s.p.i.r.it, with the founding f.a.t.hers and their voice resounding over the centuries, calling for the same e.q.u.a.lity and j..u.s.ti.ce... a voice few are able to hear....
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
Display posts from previous:   
Post new topic Reply to topic
   ArchitectureWeek DesignCommunity Forum Index » New Structure Forum Page 4 of 4
Goto page Previous  1, 2, 3, 4

 




Latest Posts   ·   ArchWeek Jobs Board   ·   Classifieds   ·   User Galleries   ·   Scrapbook   ·   Open 3D Gallery
 Architecture Search   by name of Building, Architect, or Place:  
Buildings     Architects     Types & Styles     Places     Models     GB Image Index     ArchWeek Library
Professional Directory   Web Directory   Competitions   Conferences   Events & Exhibits     Products     Media Kit
DesignCommunity   ·   ArchWeek   ·   Great Buildings   ·   Archiplanet   ·   Books   ·   Blogs   ·   Free 3D   ·   Search
© 2004-2008 Artifice, Inc. · Powered by phpBB © 2001, 2002 phpBB Group
Thème myApple v2.0.1 créé par myTemplate