autocad 2d freelancers wantred

Topical, modest, and appropriate commercial messages from forum members SEEKING design and building-related services are welcomed here. NOT for service offerings.

Freelancer

Postby HECTOR06 » Mon Nov 03, 2008 8:45 pm

Dear Clifford,
The following is in response to your add:
If you’re still looking to have a freelancer for your projects, I can definitely provide you with high quality services. My Studio has a very talented team which as being involved in a wide variety of projects, from model homes, luxury custom homes, Villas, Beach Clubs, Golf clubs, commercial, local government, renovations, additions and International Projects among others. I can provide you with services from schematic design to construction documents and construccion administration backed by our more than 12 years of experience.

I'm located in Hawaii and if you are still interested, I’ll be more than happy to provide you with more information about my work, fees and services.

Looking forward to hear from you,

Sincerely yours,

Hector Troncoso
HTConcepts
PO Box 3425
Kailua Kona, HI 96745
troncosoh002@hawaii.rr.com
HECTOR06
 
Posts: 1
Joined: Sat Nov 01, 2008 5:56 am

2D freelancer

Postby jawad195 » Fri Nov 28, 2008 3:50 pm

hi there

i can help you with your projects, my resume is below


JAWAD HABIB
4335 Whitethorn Drive, NE Calgary, AB T1Y 5R3
Tel: Res (403)-313-1651 Cell: (403)-466-1651

Objective:

Architectural Technologist

Highlights of Qualifications:

 Prepared detail plan drawings for single and multiple storey facilities.
 Proficient in using AutoCAD 2000, 2002, 2004, 2005-2008.
 Competent in using Alberta building Codes.
 Assisted and prepared elevation and section drawings for senior Architect.
 Constructed and displayed architectural models and used sketch up software for 3D planes.
 Involved in preparation of contract document.


EXPERIENCE

Architectural Technologist

Templar Architecture and Design June 15th, 2008 - till date
 Prepared working set of drawings.
 Done architecture detailing and implemented regulatory requirements.
 Prepared commercial and residential drawing sets.


Geotechnical technologist

Sabatini Earth Technologies Inc, Calgary May. 2006- Aug, 2006
 Performed slump cone test to ensure quality of concrete.
 Conducted air contents testing in concrete .
 Checked and verified the compaction of earth work using nuclear densometer.
 Documented the test results and reported to project engineer.


Assistant Model Maker

Mukhtar al Shibani Modeling Center, Riyadh, Saudi Arabia Oct, 2002- Sep, 2004

 Designed exterior envelop for residential units.
 Prepared landscape and green belt models to ensure the aesthetic view of architectural models using AutoCAD.
 Used hi-tech laser cutting machines for preparing models.
 Maintained an effective liaison within the team members which created an excellent work environment.
 Planned and scheduled the activities to prepare multiple models within the deadlines.
 Trained junior team members in preparing models by using AutoCAD.

EDUCATION

 Diploma in Architectural technology from SAIT Polytechnic Calgary in April, 2008.
 Certification in AutoCAD from ANSI College, Mardan Feb, 2002- Jul, 2002.
 Certification in Information Technology. Nov, 2001-Jan, 2002.

ADDITIONAL QUALIFICATION

 MCSE WIN 2000 ( Microsoft Certified System Engineer).
 Certificate in Information Technology.
 Certificate of “radiation safety for nuclear gauges users and TDG- class 7 training program”.


PROJECTS

 Saint John Ambulance center, head quarter building, Edmonton. (During school).
 Westcorp head office building, downtown Edmonton.
 Medicine Shoppe outlet in Sault ste Marie, Ontario.
 Medicine Shoppe outlet in Halifax, Nova Scotia.
 Medicine Shoppe outlet in Regina, Saskatchewan.
 Medicine Shoppe outlet in Miramichi, New Brunswick.
 Rexall drug store, Kelowna,BC

ACHIVEMENTS

 Captain of school, college, university cricket team.
 Arranged walks and student festivals as a member of “youth anti-narcotics club” in university.
 Certified as an active member of “Youth anti-narcotics club”.
You do not have the required permissions to view the files attached to this post.
jawad195
 
Posts: 2
Joined: Tue Nov 25, 2008 11:52 pm
Location: calgary

we design curtain walls, windows and doors

Postby fosedalhuang » Mon Dec 01, 2008 10:09 pm

Dir sir,

We have learned your company’s name from the website "http://europepropertiesdirectory.net/".
We’d like to introduce ourselves to you as a corporation specialized in building facade engineering and consultation.

Our services have encompassed every stage of building facade engineering. They are listed as follows:

1. Building facade project consultation:

a. Exterior decoration solutions

b. Facade material market price analysis

c. Tender document drafting and compiling

d. Inspecting sub-contractors’ drawings and designs

e. Manufacturing and installing quality inspection and control

f. Appraising the quality of the materials applied

g. Construction duration scheduling and control

h. Technical and cost control in additional projects and modified projects

i. Step-by-step and item-by-item acceptance

k. Investigation on closeout documents and general cost

2. Services for government projects:

a. Participating in tendering consultation and estimation as a neutral organization

b. Providing analysis report and making judgment objectively as a neutral organization when conflicts on construction quality or cost matters occur.

c. Providing technical backup and solutions on site

d. Recommending new products, technologies and workmanship to related government authorities

3. Products evaluation and recommendation

New material feasibility analysis

Solutions for new material promotion

New material technical document compiling

4. R&D services:
a. Organizing researches for new product, technology and workmanship

5. Technical consultation:

a. Tendering document compiling

b. Construction design

c. Project management

All our engineers have over 8 years experience in civil construction engineering, therefore we are adapted in all lines we handle.

in addition to traditional technical support, we also have a high level of capability to provide consultation related to new technologies in building facade engineering industry.

If you are of interest in the abovementioned items or have any questions to ask, please feel free to let us know. Welcome to visit our website to get more information about us.

Best regards

Amos Huang
Ratoy Building Facade Engineering and Consultant Co., Ltd

Address: 4F Zhentong Mansion, Cuihua Garden on Huali Road, Luohu District of Shenzhen City in Guangdong Province, China

Postal Code: 518000

Phone: +86-755-2566 0855

Fax: +86-755-25403182

E-Mail: sz@ratoy.com / fosedalhuang@163.com

Web site: www.ratoy.com
fosedalhuang
 
Posts: 5
Joined: Tue Nov 11, 2008 11:08 pm

nolimitdrafting.com Bay Area Drafting services

Postby nolimitdrafting » Sat Jun 20, 2009 4:39 am

Hi,

Please visit our Web site at http://www.nolimitdrafting.com for more information. We are located in San Francisco, California and would be more than happy to develop a long term business relationship with your company.

Best regards,
nolimitdrafting.com
nolimitdrafting
 
Posts: 2
Joined: Sat Jun 20, 2009 4:13 am

Contact from Studioduv

Postby S-DUV » Mon Jun 22, 2009 11:27 pm

Dear Sirs,

Let me introduce myself. I'm Pablo Leguizamon, Studioduv's coordinator.
Studioduv is a professional winning Urban & Architecture design office, actually working for differents projects, places and countries from Argentina. We have developed designs for USA, Canada, Spain, China, Colombia, Panama & UAE.

I invite you to visite our office in: www.studio-duv.com
Is our intention assist your design process from our Office.

Regards & Thanks,

Pablo E. Leguizamon.
Studioduv Coordinator.
Architect.
Rosario city - ARGENTINA
Email / Skipe: p_leguizamon@studio-duv.com
Website: www.studio-duv.com
S-DUV
 
Posts: 66
Joined: Mon Sep 04, 2006 9:16 pm
Location: Rosario - Argentina

3d Company in China, high quality, competitive price.

Postby davidshanghai » Sat Jul 25, 2009 10:32 pm

Image
Image
Image
Image
Image
Image
Image
Image



This is Sunrise Visual Design Co., Ltd. located in Shanghai, We'd like to give you 50 Off during the course of June – July, 2009 for our eight anniversary!
Our team has worked with oversea clients for eight years. We have about 5 renderers, 5modelers and 5animators and 2 experienced translators majoring in English.
Attaching 7 samples for your review, hoping you could know something about our quality! High quality, Competitive price and Punctuality are always being our principles to you. For more information, pls kdly visit our website: www.shanghaiarchi.com
davidshanghai
 
Posts: 38
Joined: Tue Oct 21, 2008 9:09 am

Previous

Return to Design and Building-Related Services Wanted

Who is online

Users browsing this forum: No registered users and 5 guests

User Control Panel

Login

Who is online

In this forum zone there are 5 users online :: 0 registered, 0 hidden and 5 guests (based on users active over the past 5 minutes)
Most users ever online was 593 on Sat May 26, 2018 5:18 pm

Users browsing this forum: No registered users and 5 guests
DesignCommunity   ·   ArchitectureWeek   ·   Great Buildings   ·   Archiplanet   ·   Books   ·   Blogs   ·   Search
Special thanks to our sustaining subscribers Building Design UK, Building Design News UK, and Building Design Tenders UK.